Audio Technica
Audio Technica AT-VM95E Cartridge
The Audio Technica AT-VM95E is the new Audio-Technica entry model Elliptical cartridge replacing the legendary AT95E and features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts.
The VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.
Model | AT-VM95E |
Type | VM Stereo Dual Magnet |
Mounting | 1/2” centres |
Frequency Response | 20 - 22,000 Hz |
Channel Separation | 20 dB (1 kHz) |
Output Channel Balance | 2.0 dB (1 kHz) |
Output Voltage | 4.0 mV (@ 1 kHz, 5 cm/sec) |
Vertical Tracking Angle | 23° |
Vertical Tracking Force Range | 1.8 - 2.2g (standard 2.0 g) |
Stylus Shape | Elliptical |
Stylus Size | 0.3 x 0.7 mil |
Stylus Construction | Bonded Round Shank |
Cantilever | Aluminium Pipe |
Coil Impedance | 3.3 kΩ (1 kHz) |
Coil Inductance | 550 mH (1 kHz) |
DC Resistance | 485 Ω |
Static Compliance | 17 x 10 – 6 cm / dyne |
Dynamic Compliance | 7 x 10 – 6 cm / dyne (100 Hz) |
Wire Used for Coil | T.P. Copper |
Recommended Load Impedance | 47,000 Ω |
Recommended Load Capacitance | 100-200 pF |
Cartridge Weight | 6.1g |
Dimensions | 17.2 x 18.9 x 28.3 ( H x W x D mm) |
Replacement Stylus | AT-VMN95E |
Accessories Included | Two 11 mm installation screws; Two 8 mm installation screws; Two washers |
- Aluminium cantilever
- 4.0mV output voltage
- Compatible body with all VM95 Series stylus assemblies
- Replacement for AT95E and AT95EX
- 20 to 22,000Hz frequency response