NEO
Neo Ventilator Rotary Speaker Emulator
Ventilator simlates a 122 model rotary Leslie cabinet, mic'ed up with a stereo pair on top for the treble rotor and a single mono mic below for the drum holding the woofer. The Distance knob lets you move the virtual microphones closer in for lots of amplitude modulation with an intense stereo effect and further out to create more diffuse sounds with gentle modulation.
Main features of the Neo Ventilator Rotary Speaker Emulator Pedal include:
Signal Processing | 32 Bit SHARC DSP | |
Analog Digital Conversion | 48khz, 24 Bit | |
Digital Analog Conversion | 48khz, 24 Bit | |
Noise Level | -80 dBA | |
Input Sensivity | -10 dBV (Hi), 0 dBV (Lo) | |
Input Impedance | 1MOhm | |
Output Level | +6 dBV | |
Output Impedance | 100 Ohm | |
Recommended Load Impedance | 10 KOhm or greater | |
Weight | 1,1 kg / 2 lbs 7 oz (without Power Supply) | |
Dimensions (W x D x H) | 192 x 153 x 55 mm / 7-9/16 x 6 x 5-5/32 inch | |
Mains Voltage | 100V-240V, 47Hz-63Hz | |
Current Draw | < 300mA | |
Connectors | Input Mono (Stereo Bypass optional) | |
Output L | ||
Output R / Mono | ||
Remote | ||
Controls | Speed Trim | |
Acceleration Trim | ||
Rotor Balance | ||
Drive Gain | ||
Mic Distance | ||
Effect Bypass | ||
Slow / Fast | ||
Hi / Lo Gain | ||
Key / Git (Speaker Simulation on/off) | ||
Options | Ventilator Remote footswitch Hammond CU-1 Halfmoon Switch |
- Faithful replication of the model 122 Leslie’s® rotary effect
- Independent emulations of bass and treble rotors
- Faithful replication of the original’s mechanical properties
- Speaker simulation emulating the 122’s frequency response
- Same 800Hz crossover as the original
- Adjustable rotary speed and acceleration